Minggu , 27 November 2022
Home / Penelitian / 2013 / ALAT TEPAT GUNA UNTUK PEMBUATAN LOGO PADA PROSES PEMBUATAN SEPATU UNTUK INDUSTRI KECIL

ALAT TEPAT GUNA UNTUK PEMBUATAN LOGO PADA PROSES PEMBUATAN SEPATU UNTUK INDUSTRI KECIL

Aris Budianto

ABSTRACT

Shoes are known because of their either models and also purposes. Shoes are known not only as described above, but because of the trademark as well as logo. The logo can be made by embossing technique. The authors in this study chose the title “Appropriate Tool System for Making Logo Using Emboss in Shoe Making Process For Small Industries”. This study used leather material which was varied in skin type, pressure length, and pressure temperature. The type of leather used was vegetable leather and leather box. Press length was made two kinds of 10 seconds and 20 seconds, while the pressure temperature was made three kinds, namely the scale of 100, 200 and 300. Each treatment was set of four samples, so that there were 48 kinds of samples to test the tool pressure. Results of the study shows that the longer pressure, the results are seen more clearly, as well as the temperature, the higher the temperature, the more clearly is also embosse result. The optimum results emboss was obtained at position 300 temperature scales and pressure length at 20 seconds on both kinds of leather used.

Key words: logo, emboss, leather.

Baca juga

ANALISIS KINERJA KEUANGAN PADA PERUSAHAAN KULIT EXIS COLLECTION YOGYAKARTA

Tugimin ABSTRACT This study aims to determine the level of liquidity and profitability level of ...

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan.